Article Sidebar

Download
PDF
Statistic
Read Counter : 29 Download : 30

Downloads

Download data is not yet available.

Main Article Content

Abstract

Metal forming uses plastic deformation to change the shape of the workpiece. Deformation or change in shape results from the use of a tool which is usually called a die. The die provides stresses that exceed the yield strength of the material (plastic). The forging process is one of several types of metal forming. A power hammer machine is a machine used for the formation of a product in the manufacturing process, namely with a system of continuous forging/pressure on the specimen so that the deformed specimen becomes denser and stronger according to the desired shape. The forging process is superior to other processes such as casting and machining. The effectiveness of the forging process is characterized by low costs, high productivity, and high product quality. The cold forging process needs to be improved to reduce the occurrence of fine cracks and defects. The main factor is the quality of forging results by planning the design and production of the right die, improving product quality, and reducing the number of defective products to encourage industrial competitiveness. The method in this research is the process of making the design and calculation of the main components and making the power hammer machine. The results of the design and manufacture of the power hammer machine obtained that the impact force from the design was 58.3 Kg, the rotation of the drive shaft to drive the hammer was 206.5 Rpm, the diameter of the driving shaft was 12.36 mm with the one made of 16 mm, the torque on the driving motor was 77.9 Nm, the minimum power designed is 2.2 hp with a rotation of 2800 Rpm, and is selected for the manufacture of 3 Hp, the electrical system is on / off using a throttle stomp.

Keywords

Power Hammer Forging Throttle Stomp Design Low-cost

Article Details

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Copyright (c): Agus Sifa (2023)
How to Cite
Sifa, A., Endramawan, T., Suwandi, D., Farhan, I., & Maulana, R. (2023). Design and Build Low-Cost Power Hammer Machine Based on Throttle Stomp. INVOTEK: Jurnal Inovasi Vokasional Dan Teknologi, 22(3), 179-186. https://doi.org/https://doi.org/10.24036/invotek.v22i3.1065

References

  1. Hosford, W. F., & Caddell, R. M. (2011). Metal forming: mechanics and metallurgy. Cambridge university press.
  2. Kumar, D., & Mondal, S. (2021, March). A Review on Modelling, Design and Optimization of Forging Process. In IOP Conference Series: Materials Science and Engineering (Vol. 1126, No. 1, p. 012001). IOP Publishing.
  3. Kumar, S., Babasaeb, K. A., & Dipak, K. S. (2022). An Overview of Forging Process and Defects in Hot and Cold Forging, International Research Journal of Engineering and Technology (IRJET), vol.9, no.7, 2022.
  4. Altan, T., & Tekkaya, A. E. (Eds.). (2012). Sheet metal forming: fundamentals. Asm International.
  5. Mitev, B., & Kochov, A. (2020). Modeling and simulation of forging processes. Mathematical Modeling, 4(1), 13-17.
  6. Gohil, D. (2012). The simulation and analysis of the closed die hot forging process by a computer simulation method. J. Systemics, 10(3), 88-93.
  7. Huang, H. S., & Hsia, S. Y. (2016). New design of process for cold forging to improve multi-stage gas fitting. Advances in Mechanical Engineering, 8(4), 1687814016641571.
  8. Naresh, P., Babu, A. H., & Reddy, V. M. M. S. (2016). Design and analysis of a hot forging dies. International Journal of Engineering Treends and Advanceed SCiences (IJETAS),(August), 22, 32.
  9. Rathi, M. G., & Jakhade, N. A. (2014). An overview of forging processes with their defects. International Journal of Scientific and Research Publications, 4(6), 1-7.
  10. Ulrich, K., & Eppinger, S. (2011). EBOOK: Product Design and Development. McGraw Hill.
  11. Waters, T. F. (2017). Fundamentals of manufacturing for engineers. Crc Press.
  12. Pijpers, R. J. M., & Slot, H. M. (2020, October). Friction coefficients for steel to steel contact surfaces in air and seawater. In Journal of Physics: Conference Series (Vol. 1669, No. 1, p. 012002). IOP Publishing.
  13. Khurmi, R. S., & Gupta, J. K. (2005). A textbook of machine design. S. Chand publishing.
  14. Zhira Group. (2022).ST 37 - Carbon Steel, https://metalitec.zriha.com/eng/raw-materials/st37
  15. Siagian, T., Siregar, I., Lubis, H., Tinggi, T., Hamzah, U. A., & Process, H. (2018). Characteristics of St. 37 steel materials with temperature and time on heat treatment test using furnace. Int. J. Innov. Sci. Res. Technol. (IJISRT), 3(4), 49-53.
  16. Agirre, J., Otegi, N., Abedul, D., Oruna, A., & Galdos, L. (2020). Monitoring of a Hammer Forging Testing Machine for High-Speed Material Characterization. Procedia Manufacturing, 47, 321-328.