Article Sidebar

Download
PDF
Statistic
Read Counter : 70 Download : 102

Downloads

Download data is not yet available.

Main Article Content

Abstract

This research aims to analyze the level of importance of digital literacy understanding among students of Mechanical Engineering at the University of Muhammadiyah (UM) Sumatera Barat. The digital literacy developed in this study not only facilitates access to learning references, literature, research methodologies, and testing in the field of Mechanical Engineering but also designed as a data storage place for student practical and research testing results. This research used a questionnaire as a data collection technique, which was filled out by Mechanical Engineering students at Universitas Muhammadiyah Sumatera Barat. The first questionnaire was conducted to measure the level of students' understanding of digital literacy in the field of Mechanical Engineering, and the results were used as the basis for creating a literacy website. The second questionnaire was conducted to evaluate the created literacy website. Data analysis was performed using quantitative descriptive analysis. The results showed that 57% of respondents had good understanding of digital literacy in the field of Mechanical Engineering. However, only 15% of respondents often searched for references on digital technology, and 80% of respondents faced difficulties in finding credible digital literacy sources. Moreover, most respondents expressed their interest in learning and using digital technology in research and practical work. These results served as the basis for creating a digital literacy website. The digital literacy website was evaluated, and the evaluation result showed that most respondents stated that the created literacy website was easy to use and helpful in the learning or task completion process. However, some aspects needed improvement, such as relevant and understandable content and the quality of content presentation that is more interesting for respondents. Overall, the literacy website has a high level of satisfaction in several aspects.

Keywords

Digital Literacy Design Website Mechanical Engineering Students

Article Details

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Copyright (c): Desmarita Leni, Muchlisinalahuddi Muchlisinalahuddi, Riza Muharni, Arwizet K (2023)
How to Cite
Leni, D., Muchlisinalahuddi, M., Muharni, R., & K, A. (2023). Analysis of Digital Literacy Technology Design for the Department of Mechanical Engineering Based on a Website at Universitas Muhammadiyah Sumatera Barat. INVOTEK: Jurnal Inovasi Vokasional Dan Teknologi, 23(1), 33-42. https://doi.org/https://doi.org/10.24036/invotek.v23i1.1092

References

  1. A. Heryani, N. Pebriyanti, T. Rustini, and Y. Wahyuningsih, “Peran Media Pembelajaran Berbasis Teknologi Dalam Meningkatkan Literasi Digital Pada Pembelajaran Ips Di Sd Kelas Tinggi,” J. Pendidik., vol. 31, no. 1, pp. 17–28, 2022, doi: https://doi.org/10.32585/jp.v31i1.1977.
  2. F. E. Bock, R. C. Aydin, C. J. Cyron, N. Huber, S. R. Kalidindi, and B. Klusemann, “A review of the application of machine learning and data mining approaches in continuum materials mechanics,” Front. Mater., vol. 6, p. 110, 2019, doi: https://doi.org/10.3389/fmats.2019.00110.
  3. D. Aprilman, T. Prasetio, and B. P. Irawan, “Teknis Media Animasi Dalam Pembelajaran Pemahaman Gambar Teknik Mesin Di Politeknik Raflesia,” J. Tek. Mesin, vol. 8, no. 2, pp. 12–23, 2022.
  4. R. S. Tarigan, “KEBERMANFAATAN TEKNOLOGI SISTEM INFORMASI PADA DUNIA PENDIDIKAN DI INDONESIA.” 2021.
  5. H. Hendra, D. Erawadi, and D. Leni, “Penerapan Data Sintetis dalam Simulasi Kinerja Mesin Pemipil Jagung,” J. Rekayasa Mater. Manufaktur dan Energi, vol. 6, no. 1, pp. 119–127, 2023, doi: https://doi.org/10.30596/rmme.v6i1.14219.
  6. D. Leni, F. Earnestly, R. Sumiati, A. Adriansyah, and Y. P. Kusuma, “Evaluasi sifat mekanik baja paduan rendah bedasarkan komposisi kimia dan suhu perlakuan panas menggunakan teknik exploratory data analysis (EDA),” Din. Tek. Mesin, vol. 13, no. 1, pp. 74–83, 2023.
  7. D. Wulandari and A. Subagio, “Implementasi Literasi Serta Inovasi Pemasaran Pada Usaha Mikro Kecil Dan Menengah,” J. Pengabdi. Masy. Ilmu Pendidik., vol. 1, no. 02, 2022.
  8. D. Leni and R. Sumiati, “Perbandingan Alogaritma Machine Learning Untuk Prediksi Sifat Mekanik Pada Baja Paduan Rendah,” J. Rekayasa Mater. Manufaktur dan Energi, vol. 5, no. 2, pp. 167–174, 2022.
  9. B. Koumachi, “The Digital Turn in Higher Education: A Try to demystify the Myth of the ‘Digital Natives,’” Int. J. Res. English Educ., vol. 4, no. 1, pp. 69–79, 2019, doi: 10.29252/ijree.4.1.69.
  10. A. J. Scheerder, A. J. Van Deursen, and J. A. G. M. Van Dijk, “Internet use in the home: Digital inequality from a domestication perspective,” new media Soc., vol. 21, no. 10, pp. 2099–2118, 2019, doi: https://doi.org/10.1177/14614448198442.
  11. M. B. Atoy Jr, F. R. O. Garcia, R. R. Cadungog, J. D. O. Cua, S. C. Mangunay, and A. B. De Guzman, “Linking digital literacy and online information searching strategies of Philippine university students: The moderating role of mindfulness,” J. Librariansh. Inf. Sci., vol. 52, no. 4, pp. 1015–1027, 2020, doi: https://doi.org/10.1177/0961000619898213.
  12. S. Baltes and P. Ralph, “Sampling in software engineering research: A critical review and guidelines,” Empir. Softw. Eng., vol. 27, no. 4, p. 94, 2022.
  13. K. Manurung, “Mencermati Penggunaan Metode Kualitatif Di Lingkungan Sekolah Tinggi Teologi,” Filadelfia J. Teol. Dan Pendidik. Kristen, vol. 3, no. 1, pp. 285–300, 2022.
  14. M. I. Iqbal, “Deteksi Kerusakan Ban Menggunakan Algoritma Convolutional Neural Network,” UPN Veteran Jawa Timur, 2022.
  15. L. P. A. S. Tjahyanti, P. S. Saputra, and M. Santo Gitakarma, “Peran Artificial Intelligence (AI) Untuk Mendukung Pembelajaran di Masa Pandemi Covid-19,” KOMTEKS, vol. 1, no. 1, 2022.
  16. W. T. Atmojo, A. T. Ayunda, and D. Olivia, Panduan Pembuatan Aplikasi Virtual Reality. Media Sains Indonesia, 2023.
  17. B. S. Nugraha and I. N. Firda, “Perancangan Ruang Lingkungan 3d Untuk Aplikasi Virtual Reality Simulator Pengoperasian Alat Berat,” Respati, vol. 16, no. 1, pp. 1–8, 2021, doi: https://doi.org/10.35842/jtir.v16i1.382.
  18. D. Leni, J. Hafiza, M. Muchlisinalahuddin, F. Earnestly, and R. Muharni, “PEMANFAATAN SISTEM INFORMASI MUSYAWARAH GURU MATA PELAJARAN JURUSAN TEKNIK PERMESINAN KOTA PADANG,” RESWARA J. Pengabdi. Kpd. Masy., vol. 4, no. 1, pp. 620–631, 2023.
  19. M. Nurlailah, “ANALISIS LITERASI DIGITAL DAN KETERAMPILAN BERPIKIR KRITIS MAHASISWA PADA PEMBELAJARAN BERBASISI WEB,” UIN RADEN INTAN LAMPUNG, 2022.
  20. M. Ashari and N. S. Idris, “Kemampuan Literasi Digital Generasi Digital Native,” in Seminar Internasional Riksa Bahasa, 2019, pp. 1355–1362.
  21. W. Riyadi, I. Irawan, and M. Istoningtyas, “Evaluasi kegunaan aplikasi sistem informasi kota Jambi (SIKOJA) dengan metode Sistem Usability Scale (SUS),” J. Process., vol. 15, no. 2, pp. 135–144, 2020, doi: https://doi.org/10.33998/processor.2020.15.2.877.
  22. A. Apriani, “Evaluasi Penerapan Teknologi Informasi E-Learning Pada Kampus Swasta Menggunakan Cobit 4.1,” J. Bumigora Inf. Technol., vol. 1, no. 2, pp. 161–166, 2019, doi: https://doi.org/10.30812/bite.v1i2.598.
  23. J. W. Kusum, M. R. Akbar, and M. Fitrah, DIMENSI MEDIA PEMBELAJARAN (Teori dan Penerapan Media Pembelajaran Pada Era Revolusi Industri 4.0 Menuju Era Society 5.0). PT. Sonpedia Publishing Indonesia, 2023.
  24. T. Rahayu, T. Mayasari, and F. Huriawati, “Pengembangan media website hybrid learning berbasis kemampuan literasi digital dalam pembelajaran fisika,” J. Pendidik. Fis., vol. 7, no. 1, pp. 130–142, 2019.
  25. W. Y. Sembada, A. O. Indarso, and I. R. Sutowo, “Pendampingan Pengoptimalan Pengelolaan Konten Website Dan Literasi Digital Di Yayasan Rumah Langit,” Empower. J. Pengabdi. Masy., vol. 1, no. 3, pp. 338–342, 2022, doi: https://doi.org/10.55983/empjcs.v1i3.138.